Products
Cardiology Products Back to Cardiology Section
| Code | Name | Description & Specifications | |
Stimulators |
|||
| 0101 | Model 7A Stimulator |
Transesophageal Cardiac Stimulator intended for temporary pacing of the atrium and designed for use with the Model 3 Preamplifier for the recording of esophageal cardiac signals
Amplitude - constant current, continuously variable from 0-40 MA. Pacing Rate - variable from 60 - 600 BPM. Pulse Width - continuously variable rectangular pulse from 0 -10 ms. Load Impedance - constant current at impedances up to 4k ohms at 20 MA. Size - 6.7 cm (2.625") high x 19.7 cm (7.75") deep x 20.6 cm (8.125") wide. Weight - 1 kg (2.25 lb). Battery Type - four 9-Volt alkaline. |
|
| 0104 | Model 3 Preamplifier |
Amplification and signal processing module designed to interface to CardioCommand esophageal catheters to enable recording of esophageal cardiac signals
Amplifier - differential input gain of 2, 20 Hz high-pass filter. Size - 6 cm (2.375") high x 16.2 cm (6.375") deep x 13 cm (5.125") wide. Weight - 0.45 kg (1lb). Battery Type - two 9-Volt alkaline. |
|
Catheters |
|||
| 180-0005 | TAPCATH 205 (5/box) |
5 French Esophageal Bipolar Pacing and Recording Catheter
Electrode Configuration - bipolar, stainless steel. Catheter Length - 100 cm (39.4"). Electrode Length - 3.55 mm. Interelectrode spacing - 15.5 mm (0.61") center-to-center. Catheter Printing - Depth of insertion from teeth (cm). Latex Free. Non-Sterile. Single Patient Use. |
|
| 1600-0005 | TAPCATH Model 1600 (5/box)  |
6 French Esophageal Octapolar Recording Catheter
Electrode Configuration - octapolar, stainless steel. Catheter Length - 102.9cm (40.5"). Electrode Length - 3.5 mm (0.138") Interelectrode spacing - 7.0 mm (0.275") center-to-center; 3.5 mm (0.138") end-to-end Latex Free. Non-Sterile. Single Patient Use. This is a non-inventoried product. Allow 6 to 8 weeks for delivery. |
|
| 100-0010 | TAPSCOPE 210 (10/box) |
10 French Esophageal Bipolar Pacing and Recording Catheter
Electrode Configuration - bipolar, stainless steel. Catheter Length - 97.5 cm (38.4"). Electrode Length - 10.2 mm. Interelectrode spacing - 30.6 mm (1.20") center-to-center. Catheter Printing - Depth of insertion from teeth (cm). Latex Free. Non-Sterile. Single Patient Use. |
|
| 102-0010 | TAPSCOPE 210-S (10/box) (with Stylet) |
10 French Esophageal Bipolar Pacing and Recording Catheter
Electrode Configuration - bipolar, stainless steel. Catheter Length - 97.5 cm (38.4"). Electrode Length - 10.2 mm. Interelectrode spacing - 30.6 mm (1.20") center-to-center. Catheter Printing - Depth of insertion from teeth (cm). Latex Free. Non-Sterile. Single Patient Use. |
|
Accessories |
|||
| 8027 | Instrument Cable |
Instrument Cable 7A Stimulator or Model 3 Preamp | |
| 8023 | Patient Lead Wire |
Patient Lead Wire, White, Right Arm | |
| 8021 | Patient Lead Wire |
Patient Lead Wire, Black, Left Arm | |
| 8031-0001 | EP Connect Cable |
EP Connect Cable (10 ft) - Modular to Pin Connector | |
| 8032 | EP Connect Cable Model 8032, Octapolar  |
EP Connect Cable (10 ft) - Modular to Pin Connector | |
| 0406-0 | Interface Cable |
Interface Cable 7A/3 | |
Anesthesia Products Back to Anesthesia Section
| Code | Name | Description & Specifications | |
Stimulators |
|||
| 8002A | TAPSYSTEM™ Model 2A |
Pulse Generator - a system designed for the treatment of cardiac dysrhythmias.
Output Current - 5.5 to 40 mA. Rate Range - 50 to 200 PM. Pulse Width - 10 milliseconds. Power - Two alkaline "D" cell batteries. Load Impedance - Constant current at impedances up to 2k ohms at 20 mA. Size - 17 cm x 12 cm x 7.4 cm. Weight - 1.0 kg ( with batteries). |
|
Catheters |
|||
| 200-0025 | TAPSCOPE 550 (25/box) (Male Temp. Connector)  |
18 French, Esophageal Stethoscope with Bipolar Pacing and Recording Electrodes
Electrode Configuration - Bipolar, stainless steel Catheter Length - 53.5 cm (21"). Electrode Length - 10 mm. Interelectrode Spacing - 4 cm (1.57"). Temperature - YSI 400 Compatible Thermistor, Male Temperature Connector. Latex Free. Non-Sterile. Single Patient Use. |
|
| 200-0010 | TAPSCOPE 550 (10/box) (Male Temp. Connector) |
18 French, Esophageal Stethoscope with Bipolar Pacing and Recording Electrodes
Electrode Configuration - Bipolar, stainless steel Catheter Length - 53.5 cm (21"). Electrode Length - 10 mm. Interelectrode Spacing - 4 cm (1.57"). Temperature - YSI 400 Compatible Thermistor, Male Temperature Connector. Latex Free. Non-Sterile. Single Patient Use. |
|
| 250-0025 | TAPSCOPE 550F (25/box) (Female Temp. Connector) |
18 French, Esophageal Stethoscope with Bipolar Pacing and Recording Electrodes ( Female Temperature Connector)
Electrode Configuration - Bipolar, stainless steel Catheter Length - 53.5 cm (21"). Electrode Length - 10 mm. Interelectrode Spacing - 4 cm (1.57"). Temperature - YSI 400 Compatible Thermistor, Female Temperature Connector. Latex Free. Non-Sterile. Single Patient Use. |
|
| 250-0010 | TAPSCOPE 550F (10/box) (Female Temp. Connector) |
18 French, Esophageal Stethoscope with Bipolar Pacing and Recording Electrodes ( Female Temperature Connector)
Electrode Configuration - Bipolar, stainless steel Catheter Length - 53.5 cm (21"). Electrode Length - 10 mm. Interelectrode Spacing - 4 cm (1.57"). Temperature - YSI 400 Compatible Thermistor, Female Temperature Connector. Latex Free. Non-Sterile. Single Patient Use. |
|
Accessories |
|||
| 8028 | EC-View |
ECG Adapter for TAPSCOPE, which provides an esophageal ECG. | |
| 2010 | Patient Cable |
Patient Cable Model 2A | |
| 8012 | Pole Mount |
Pole Mount for TAPSYSTEM™ Model 2A | |